Viessmann Vitodens 100-W Betriebsanleitung PDF herunterladen (Seite 14)

Operation

Service Instructions for Your Heating System

Viessmann strongly recommends inspection/service of the boiler and the system by a

licensed professional heating contractor once per year.

Before the heating season begins, the boiler with its burner(s) and vent system should be

serviced by a qualified heating contractor. Service contracts may be established through

gas suppliers or other licensed contractors in your area.

Regular inspection/service ensures troublefree, energy-efficient and environmentally

friendly heating activity of your heating system.

Boiler

All boilers must be cleaned on a regular

basis as debris build-up will result in

increased flue gas temperature, and thus

in increased energy consumption.

Notes on operation:

H Ensure boiler room and boiler

are clean.

H Regularly check heating system

pressure on the pressure gage:

If the system o perating pressure

gage is indicating a pressure of

below 14 psig, the system pressure

is to o low; in this case, please

contact your heating contractor.

Viessmann domestic hot water storage

tank

Inspection and (if necessary) cleaning of

the tank must take place within 2 years of

initial start-up and every 2 years

thereafter.

Cleaning of the inside surfaces of the

domestic hot water storage tank, including

domestic hot water connections, may only

be performed by an licensed professional

heating contractor.

Vitocell 100:

Viessmann recommends an annual

inspection, and replacement if required, of

the consumable anode by a licensed

professional heating contractor.

The inspection can be carried out during

regular operation of the heating system;

shut-down is not required.

The heating contractor measures the

protective current with an anode testing

instrument.

If a water treatment device (water

softener) is installed in the domestic cold

water supply to the hot water storage

tank, ensure its proper working condition

is checked regularly by your heating

contractor.

The same applies if a dirt trap or a water

filter is installed in the domestic cold

water supply. Any of these devices

installed in the domestic cold water supply

must be flushed out and serviced on a

regular basis.

Drinking water filter (if installed)

For hygienic reasons

H replace filter element every

6 months on filters which cannot be

flushed back, and perform a visual

inspection every 2 months,

H flush back reversible flow filters

every 2 months.

Please follow manufacturer’s

instructions.

5581 532 v1.1

IMPORTANT

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Viessmann Vitodens 100-W Betriebsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Warmwasserbereiter & Kessel Viessmann Vitodens 100-W